Skateboard Size Guide: Deck, Trucks, Wheels and Bearings

Related Articles

Disclosure: As an Amazon Associate, Longboard Expert earns from qualifying purchases. If you buy through links on this page, we may earn a small commission at no extra cost to you.

Most adults ride a skateboard deck 8.0 to 8.5 inches wide; most kids ride 7.0 to 7.75 inches. Choose width by your shoe size and riding style: narrower decks (7.75 to 8.25 inches) are easier to flip for street tricks, while wider decks (8.25 to 9 inches) are more stable for bowls, ramps and big gaps. Match your trucks to the deck width, pick wheels by where you ride (about 50 to 54 mm for street, 54 to 60 mm for parks and cruising), and use standard 608 bearings.

Quick size guide

  • Deck width: shoe size 6.5 to 9: 7.5 to 8.0 in; shoe size 9.5+: 8.0 to 8.5 in
  • Trucks: axle width close to deck width
  • Wheels: 50 to 54 mm street, 54 to 60 mm park and bowl, 56 mm+ soft for cruising
  • Bearings: 608 size, 8 per board, fits all standard skateboards
  • Riding a longboard? Use our longboard size calculator

Skateboard deck size chart

By shoe size (adults)

US men’s shoe size Deck width
6.5 to 9 7.5 to 8.0 in
9.5 and up 8.0 to 8.5 in

From Tactics’ skateboard size guide. US women’s sizes: subtract about 1.5.

By riding style

Style Deck width Why
Street: flip tricks, ledges, manuals 7.75 to 8.25 in Lighter and easier to flip
Park and bowl, stairs, rails, gaps 8.25 to 9.0 in More stable on landings
All-round / beginner adult 8.0 to 8.25 in A good middle ground
Cruising Wider cruiser shapes, often 8.5 in+ Comfort and stability

By age and height (kids)

Age (approx.) Height Deck width
5 and under Under 3 ft 6 in 6.5 to 7.0 in (micro)
5 to 10 Under 5 ft 7.25 to 7.5 in
10 to 13 About 4 ft 6 in to 5 ft 3 in 7.75 in
13+ 5 ft and over 8.0 in+

For more on kids’ boards, see the best skateboards for kids.

Deck length, wheelbase and concave

Standard decks are about 28 to 32 inches long; length mostly follows width, so you rarely choose it separately. The wheelbase (distance between the inner truck holes) is usually 13.75 to 14.5 inches: shorter turns quicker, longer feels more stable. Concave (the curve across the deck) ranges from mellow to steep; steeper concave gives more grip for flip tricks, mellow concave is more comfortable for beginners.

Skateboard truck size

Trucks are measured by their axle width (or hanger width). Choose trucks whose axle is about the same width as your deck, so the wheels sit close to the deck edges. Each brand lists which deck widths each truck size fits, so check its size chart. Most beginners also do well with medium bushings; heavier riders may want harder bushings.

Skateboard wheel size and hardness

Wheel size Best for
50 to 53 mm Street and technical tricks; light and quick
54 to 56 mm All-round, park and bowls
56 to 60 mm Bowls, ramps and transition; also cruising
60 mm and up Cruisers and longboards; usually soft
Hardness (durometer) Best for
99a to 101a Skateparks and smooth surfaces; fast and slidey
95a to 98a Street; a bit more grip on rough ground
78a to 90a Cruising on rough roads; smooth and quiet

Wheels over about 56 mm may need riser pads (about 1/8 inch) to avoid wheel bite, where the wheel touches the deck in a sharp turn. Longboard wheels are a separate topic; see the best longboard wheels for cruising.

Skateboard bearing size

Almost all skateboards and longboards use 608 bearings: 8 mm bore, 22 mm outside diameter, 7 mm wide. You need 8 bearings (2 per wheel), plus spacers between them. Brand and build quality matter more than the ABEC rating; see the best skateboard and longboard bearings.

Hardware size

Use 7/8-inch hardware (bolts) with no riser pads, about 1 inch with 1/8-inch risers, and longer bolts for thicker risers. You need 8 bolts and nuts.

8.0 in skateboard completes on Amazon →  |  54 mm wheels →

Frequently asked questions

What size skateboard should I get?

Most adults do well with an 8.0 to 8.25 inch deck. Go narrower for street tricks and smaller feet, wider for bowls and bigger feet.

Is an 8.0 or 8.25 skateboard better?

8.0 is a little easier to flip; 8.25 is a little more stable. Both suit most adult beginners; pick by shoe size and style.

What size wheels for a beginner skateboard?

About 52 to 54 mm, 99a, for skateparks and tricks. Choose softer, bigger wheels if you mainly cruise on rough pavement.

Are skateboard and longboard bearings the same size?

Yes. Both use standard 608 bearings.

Sources: Tactics skateboard size and buying guide (deck width by shoe size and style); Skatewarehouse kids skateboard size guide (age and height); manufacturer truck and wheel sizing charts. Sizes are guidelines; personal preference matters.

More on this topic

Comments

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Popular stories