Can You Ride an Electric Skateboard in the Rain?

Related Articles

Disclosure: As an Amazon Associate, Longboard Expert earns from qualifying purchases. If you buy through links on this page, we may earn a small commission at no extra cost to you.

You shouldn’t ride an electric skateboard in the rain. Most e-skateboards are water-resistant at best, not waterproof: water can short the motor controller, damage the battery and rust the bearings, and wet urethane wheels lose grip, making braking and turning dangerous. Evolve, for example, says water damage isn’t covered under warranty on any of its boards. If you get caught in a shower, ride slowly to shelter, dry the board, and don’t charge or power it on for at least 24 hours.

Quick answer

  • Rain: avoid it; water can damage electronics and wet wheels slip
  • Wet roads after rain: also risky; puddles splash water into the electronics
  • Water-resistance (IP) rating: helps against splashes, but isn’t permission to ride in rain
  • Warranty: water damage is often excluded
  • Caught in rain? Dry it, wait 24 hours, then test before charging

What rain does to an electric skateboard

Part Risk
Motor controller (ESC) Water can short it, causing sudden failure, which can mean losing power or brakes
Battery Damage can be slower: lost capacity, unstable charging and, in the worst case, a fire risk
Motors Brushless motors tolerate some splash, but water can travel along wires to the controller and battery
Bearings Water washes out grease and causes rust, making wheels gritty and slow
Wheels and grip Urethane street wheels become very slippery; braking distances grow
Remote Most remotes aren’t waterproof

Electronics and grip risks from Evolve Skateboards’ guidance on riding in the rain.

What do IP ratings mean?

Some boards list an IP (Ingress Protection) rating. The second digit shows water protection: IPX4 means splash-resistant from any direction, IPX5 means protected against water jets, and IPX6 against stronger jets. None of these means you can submerge the board or ride through deep puddles, and a rating applies to a new board with seals intact. Even with an IP rating, many brands exclude water damage from the warranty, so read the terms.

If you get caught in the rain

  1. Slow down and brake gently; wet wheels slide easily.
  2. Avoid puddles, painted lines, metal covers and leaves, which are especially slippery.
  3. Get to shelter or carry the board if possible.
  4. Turn it off once you stop.

How to dry an electric skateboard after rain

  1. Don’t charge it right after it gets wet.
  2. Wipe it down: deck, trucks, wheels, motors and the enclosure seams.
  3. Let it dry in a dry, room-temperature place for at least 24 hours before powering it on, as Evolve recommends.
  4. Check the belts and bearings for moisture and grit; clean and lube bearings if they feel rough. See bearing care.
  5. Test carefully: if acceleration or braking feels odd, stop riding and have it checked.

Which boards handle wet conditions best?

Boards with sealed enclosures, an IP rating and pneumatic (air) all-terrain tires cope better with damp roads than boards with exposed electronics and hard street wheels. Still, treat water-resistance as a safety margin, not a feature to rely on. Compare brands in our electric skateboard brands guide and buying guide.

Water-resistant e-skateboards on Amazon →

Frequently asked questions

Are electric skateboards waterproof?

No. Even boards with an IP rating are only water-resistant to splashes or light spray.

Can I ride on wet roads after the rain stops?

It’s still risky: puddles and spray can reach the electronics, and wet roads reduce grip. Wait for the roads to dry if you can.

Does warranty cover water damage?

Often not. Evolve, for example, doesn’t cover water damage on any of its boards. Check your board’s warranty.

What about regular longboards in the rain?

No electronics to worry about, but grip and bearings still suffer; see how to ride a longboard in the rain.

Sources: Evolve Skateboards “Do electric skateboards work in the rain?” (risks, drying, warranty); IEC 60529 IP rating definitions. Always follow your board’s manual.

More on this topic

Comments

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Popular stories